How to Measure Your Folding Treadmill for a Cover
Choosing the right cover for a folding treadmill starts with accurate measurements. Because treadmills vary in size, shape, and design, measuring your equipment before ordering helps you determine whether a standard cover will provide adequate coverage.
A folding treadmill can be especially challenging to measure because its track, display, and frame may extend to different heights and widths. Follow the steps below to measure your treadmill and compare its dimensions with the available cover sizes.
What You'll Need
Before you begin, gather a few basic supplies:
A flexible measuring tape
A notepad or phone to record measurements
A second person to help hold the tape, if needed
Measure your treadmill in the folded position if that's how you plan to store it under the cover. Make sure the treadmill is turned off and stationary before measuring.
Record all measurements in inches and round up to the nearest inch. This gives you a little room when comparing your measurements with the cover dimensions.
Step 1: Measure the Height
Folding treadmills often have two different high points, so you'll want to measure both.
Overall height: Measure from the floor to the highest point of the folded treadmill. This is often near the end of the raised track.
Front height: Measure from the floor to the top of the display or console at the front of the treadmill.
Record both measurements. The console and raised track may sit at different heights, and knowing both helps you evaluate how a cover will fit over the entire machine.
Step 2: Measure the Width
Measure the treadmill from side to side at its widest points.
The widest area may be near the base, the back of the track, or another part of the frame. Don't assume the treadmill has the same width from front to back.
Check the following areas:
The base of the treadmill
The back of the raised track
Any other section that extends beyond the main frame
Record the largest measurement. This is the overall width you'll use when comparing cover sizes.
Step 3: Measure the Length
Next, measure the treadmill from front to back at its longest points.
On a folded treadmill, the raised track may extend farther than the base. Measure from the farthest point at the back of the track to the farthest point at the front of the display or console.
Also check the length along the bottom of the treadmill. The base may extend beyond the upper portion of the machine.
Record the longest measurement so you don't underestimate the amount of coverage needed.
Step 4: Record and Double-Check Your Measurements
Before looking for a cover, review your measurements and make sure you've recorded the largest dimensions.
Use this checklist:
Overall height: Floor to highest point
Front height: Floor to top of display
Overall width: Widest point from side to side
Overall length: Longest point from front to back
If possible, measure each dimension a second time. Small measurement errors can make a difference when choosing a cover.
Step 5: Compare Your Measurements With the Cover Dimensions
Once you have your measurements, compare them with the dimensions listed for the treadmill cover you're considering.
Pay attention to more than just the overall length, width, and height. Look at the cover's shape and intended application, too. A folding treadmill may have an unusual profile that affects how well a standard cover fits.
A few things to keep in mind:
Allow for the treadmill's full shape. Make sure the cover can accommodate the display, raised track, and base.
Check the folded position. Confirm that the cover is intended for a treadmill stored in the same position you measured.
Don't assume a larger cover is always better. An oversized cover may be loose, difficult to handle, or more likely to shift.
Review the product dimensions. Compare your measurements with the actual cover specifications rather than relying only on the treadmill's model name.
If your treadmill's dimensions fall outside the measurements listed for an available cover, it may not provide the coverage you need.
Frequently Asked Questions
Should I measure my folding treadmill folded or unfolded?
Measure your treadmill in the folded position if that's how you plan to store it under the cover. The folded position changes the machine's overall dimensions, particularly its height and length.
Do I need to measure both the display and the raised track?
Yes. The display and raised track may reach different heights when the treadmill is folded. Measuring both helps you account for the full shape of the machine and avoid overlooking its highest points.
How do I measure a folding treadmill's length?
Measure from the farthest point at the back of the raised track to the farthest point at the front of the display or console. Also check the length of the base, since it may extend beyond the upper portion of the treadmill.
Can I use the manufacturer's listed dimensions instead of measuring my treadmill?
Manufacturer specifications can be a helpful starting point, but they may not provide all the measurements needed to evaluate cover compatibility. Measuring your treadmill directly helps account for its folded configuration and any components that extend beyond the main frame.
How much larger should a treadmill cover be than the treadmill?
There isn't a universal amount of extra room that works for every folding treadmill. The appropriate fit depends on the cover's dimensions and design. Compare your treadmill's measurements with the actual cover specifications rather than assuming a larger cover will necessarily work better.
Will a standard folding treadmill cover fit every folding treadmill?
No. Folding treadmills vary considerably in their dimensions and configurations. Compare your treadmill's length, width, and height with the measurements listed on the product page before ordering.
What should I do if my treadmill measurements are larger than the cover dimensions?
If one or more of your treadmill's measurements exceed the listed cover dimensions, the cover may not provide adequate coverage. Consider the full shape of your treadmill and contact the seller if you're unsure whether the cover is suitable.
Can I leave my treadmill folded while it's covered?
Yes, provided the cover is designed for the treadmill's folded dimensions and intended storage position. Always check the cover specifications to make sure it accommodates the machine in that configuration.
Final Tips for Measuring a Folding Treadmill
Taking a few extra minutes to measure your treadmill carefully can help you avoid ordering a cover that's too small or too large.
Remember to measure the treadmill in the position where it will be covered, check all protruding components, and record the largest dimensions at each point. If you're unsure whether your measurements are compatible with an available cover, contact the seller before placing your order.
You can compare your measurements with the dimensions of our standard folding treadmill cover to see whether it's a suitable fit.
